Parallel HPLC / SFC

The Sepmatix 8x Screening HPLC system is working with eight channels in parallel. The system only uses one external HPLC pump. The flow is separated by the patented Sepmatix Flow Control into eight channels, and the flow in each channel is precisely measured and regulated throughout the entire run. Together with an autosampler and an 8x parallel working detector, the result is an unbelievable compact HPLC system which will instantly enhance the throughput of every research and development laboratory eight times over.

It is not necessary to spend time adapting methods to the new system or to purchase any new costly HPLC columns. The users can continue to use all the methods and separation material that they were using with their conventional HPLC systems.
The Sepmatix 8x Screening system can separate substances on eight different separation columns simultaneously. This significantly increases sample throughput.
The system consists of three modules: an 8x Flow Control low viscosity version with flow rates of between 0.25 to 1.25 ml/min; an autosampler with syringe pump which injects samples from standard microtiter plates or deep-well microtiter plates onto eight columns (also suitable for vial racks); and an 8x Diode Array Detector with eight analytical flow cells applicable for the spectral range of 200 to 600 nanometres.
The required space for the Sepmatix system is only 55 x 55 x 90 centimetres (W x D X H).
The Sepmatix 8x Flow Control is available as an analytical version (with flow rates from 0.25 to 1.5 m / min per channel), a semiprep version (1.5 to 6.0 ml / min per channel) and a prep version (6.0 to 20 ml / min per channel).

Products Link