Laboratory, medical & industrial applications all need pure water in various qualities and quantities. The Protegra CS RO Series produces pure water for a wide variety of applications by reversing the natural osmosis process to deionize water in an environmentally friendly manner..
Consistently high water quality without the use of chemicals :
The combination of Protegra CS RO Series with the EI-Ion Electro – deionization module significantly improves the quality of the pure water. The Protegra CS RO/EDI Series are available with either a single stage or a two-stage EI-Ion Electro deionisation module. Our system are distinguished by their ability to produce a consistent level of pure water quality, reaching conductivity values less than 0.1 us/cm in a single stage plant and below 0.07 us/cm in a two stage plant.
|Pure water Production||LPH||120||260||500||750|
|Pure Water Quality||us/cm||<0.5||<0.5||<0.5||<0.5|
|Typical pure water quality||us/cm||<0.1||<0.1||<0.1||<0.1|
|Recovery Rate Max||%||75||75||75||75|
|Operating Pressure Max||bar||14||14||14||14|
Siemens Water Technologies modular polishing system delivers up to 14 liters per minute of Type 1 quality, ultra pure water at the point-of-use dispense. Whether you need water for media or reagent preparation or for microbiological buffer preparation, our system can provide you with water whenever you need it.General Description:
The MODULAB® High Flow water system is a modular, point-of-use polishing system which consistently provides high quality Type 1 water (up to 18.2 MΩ - cm @ 25 ºC) with flow rates up to 14 lpm (3.7 gpm) of pretreated water.
The MODULAB® High Flow system is a wallmountable unit that requires a minimal footprint for installation.
The MODULAB® High Flow is delivered fully assembled and functionally tested. Cartridges will need to be purchased separately and should be installed after the system has been safely mounted.
The system is offered in three configurations: 1) a low TOC model 2) a low bacteria model and 3) a low pyrogen model.